Tip: Peanut oil is the most popular type of oil used for deep frying a turkey, but any oil with a smoking point of 450 degrees Fahrenheit will work. Try safflower oil or corn oil if you don’t like peanut oil or are accommodating a peanut allergy. Either use a fresh turkey or thoroughly thaw a frozen turkey.
How much oil do I need to deep-fry a 14 pound turkey?
Place the pot on the burner and clip the deep-fry thermometer to the side of the pot. Fill the pot with peanut or canola oil up to the mark you made earlier—you’ll need 4 to 5 gallons to fry a 12- to 14-pound turkey in a 30-quart pot.
How long do you deep-fry a turkey?
Cook the turkey about 3 to 4 minutes per pound. The turkey is done when the dark meat is at an internal temperature of 175° F to 180° F and all white meat is at an internal temperature of 165° F to 170° F.
Can you fry turkey with vegetable oil?
Deep-frying makes the turkey crispy on the outside and super juicy on the inside (even the white meat). It also leaves the heat outside! You can deep-fry the turkey in either peanut or vegetable oil, your choice.
Can I mix peanut oil and vegetable oil to fry a turkey?
Yes, you can mix peanut oil and vegetable oil while cooking. Both will easily dissolve in each other.
Can I mix peanut oil and canola oil to fry a turkey?
Can you mix Peanut Oil with Canola Oil? Yes. Peanut oil may have a slight taste to it, but it shouldn’t have enough of a taste to impact your your final dish. Canola Oil has a lower smoke point temperature of around 400° F, so you’ll want to ensure you don’t get too close to that.
How long does it take to fry a 10lb turkey?
When the oil reaches the target temperature, slowly lower the turkey and basket into the fryer. Set the timer for 3 to 4 minutes per pound. For example, if you’re trying to decide how long to deep fry a 20 pound turkey, 3 x 20 = 60 minutes minimum. Turkey fry time for a 10 pound bird should be 30 to 40 minutes.
Do you brine a turkey before deep frying it?
Cover and refrigerate for 8 to 16 hours, turning the bird once halfway through brining. Keep brine at or below 40 degrees F (4 degrees C) while marinating. Pat turkey dry before frying!
How do you fry a turkey without peanut oil?
Canola, another popular frying oil, has a smoke point of only 400 degrees and will turn your turkey to charcoal if you’re not careful. If peanut allergies are an issue, corn oil also has a 450-degree smoke point, but its flavor is somewhat less neutral than peanut oil’s.
When should you inject a turkey before frying?
Traditionally, a fried turkey is injected with a marinade before it’s cooked; how long before cooking is a subject of debate. You can inject the turkey anywhere from 24 hours to 5 minutes before frying. We had good results injecting two hours before frying.
What temperature should I fry my turkey?
Fry the turkey for 3 minutes per pound (455 grams). For a 15 lb (6.8 kg) turkey, this will take 45 minutes. Make sure the oil temp is maintained at 350°F (180°C). After 45 minutes, turn off your propane burner and then gently remove the turkey from the oil.
Do you have to use peanut oil to fry a turkey?
The USDA notes that turkey needs to be fried at a temperature of 350 degrees Fahrenheit, so you need to use an oil that has a smoke point higher than 350 F. The USDA lists the smoke points of oils that can be used for deep-frying: … Soybean, safflower and peanut oil: 450 F.